Products - DIGI WR31 | Intelligent Industrial 4G LTE Cellular Router
Hot
DIGI WR31 | Intelligent Industrial 4G LTE Cellular Router
The DIGI WR31-L92A-DE1-TB | A Reliable Industrial Cellular LTE Router
The DIGI WR31-L92A-DE1-TB is an intelligent industrial 4G LTE router designed for performance and reliability across a range of critical infrastructure and industrial applications. It provides a secure, reliable connection to industrial controllers, process automation equipment, and smart grid assets on third-party sites or remote locations. The rugged design makes the Digi WR31 cellular router suitable for demanding environments like mining, utilities and oil and gas. Software-defined, multi-carrier networking, and global LTE and HSPA+ options make it easy to get connected. This drop-in connectivity gives operators a way to reduce downtime and service calls, and also increase revenue by bringing distributed sites online faster.
- Description
- Technical Specifications
- Datasheet
Description
IDEAL FOR CONNECTING:
- Building and process automation controllers
- Smart grid assets (meters, switches, controllers)
- IP cameras and access controllers
- Remote data loggers, flow meters, and sensing equipment
- Telco infrastructure
- Traffic and obstruction lighting
KEY INDUSTRIES
| LTE – ANZ/LATAM (L9) | LTE-Advanced Cat 6: 700(B28)/850(B5,B18,B19)/900(B8)/1500(B21)/1800(B3)/1900(B39)/2100(B1)/ 2600(B7,B38)/2300(B40)/2500(B41) 3G HSPA+: 800/850/900/1700/2100 MHz Transfer rate (max): 300 Mbps down, 50 Mbps up GNSS: 30 channels (16 GPS, 14 GLONASS) simultaneous tracking |
| SOFTWARE & MANAGEMENT | |
| REMOTE MANAGEMENT | Digi Remote Manager® (cloud based); SNMP v1/v2c/v3 (user installed/managed) |
| LOCAL MANAGEMENT | WebUI (HTTP/HTTPS); CLI (Telnet, SSH, SMS) |
| MANAGEMENT/ TROUBLESHOOTING TOOLS | FTP, SFTP, SCP; protocol analyzer with PCAP for Wireshark; event logging with Syslog and SMTP; NTP/SNTP |
| WIRED INTERFACES | |
| ETHERNET | |
| PORTS | (2) RJ-45; 10/100 Mbps (auto-sensing) |
| SERIAL | |
| PORTS | (1) DB-9; DCE |
| STANDARD | RS-232/422/485 |
| SIGNAL SUPPORT | TXD, RXD, RTS, CTS, DTR, DCD, DSR, RI |
| FLOW CONTROL | Software (XON/XOFF), hardware supported |
| I/O | |
| CONNECTOR | 5-pin screw down terminal block |
| DIGITAL | 0-30 VDC, 200 mA max.; (2) I/O, software selectable |
| ANALOG | (1) analog I/O; 4-20 mA or 0-10 V, software selectable; 12 bit resolution |
| USB | |
| PORTS | (1) USB 2.0 Type A |
| PHYSICAL | |
| DIMENSIONS (L X W X H) | 12.7 cm x 8.9 cm x 5.1 cm (5 in x 3.5 in x 2 in) |
| WEIGHT | .5 kg (1.1 lb.) |
| STATUS LEDS | Power, service, WWAN, 3x signal strength, user programmable |
| ENCLOSURE/RATING | Aluminum / IP30 |
| MOUNTING | DIN rail mount included |
| POWER REQUIREMENTS | |
| POWER INPUT | 9 – 30 VDC, 18 W min power source required |
| POWER CONNECTOR | Screw down removable terminal block |
| POWER CONSUMPTION | 4 W typical (Idle); 12 W typical (Peak Tx/Rx) |
| ENVIRONMENTAL | |
| HAZARDOUS (CLASS 1 DIV 2) | Yes |
| OPERATING TEMPERATURE | -34° C to 74° C (-29° F to 165° F); reduced cellular performance may occur above 60° C (140° F) |
| STORAGE TEMPERATURE | -40° C to 85° C (-40° F to 185° F) |
| ETHERNET ISOLATION | 1.5 kV RMS |
| SERIAL PORT PROTECTION (ESD) | 15 kV |
| RELATIVE HUMIDITY | 5% to 95% (non-condensing) |
| APPROVALS | |
| CELLULAR | PTCRB |
| SAFETY | Hazardous locations: ANSI/ISA-12.12.01-2015, CAN/CSA C22.2 NO.213-15 Ordinary locations: UL 60950-1, 2nd Edition, 2014-10-14; UL 62368: 2014, 2nd Edition ATEX standards: Protection method  II 3 G Ex nA IIC T4 GcEN 60079-0:2012+A11:2013, EN 60079-15:2010, DEMKO 15 ATEX 1574X Rev. 1 |
| IECEX STANDARDS | US/UL/ExTR17.0077/00 |
| EMISSIONS/IMMUNITY | CE, FCC Part 15 Class B, AS/NZS CISPR 22, EN55024, EN55022 Class B |
| WARRANTY | |
| PRODUCT WARRANTY | 3-year* |
*Standard 3-year warranty upgradeable to 5 years with purchase of a Digi Remote Manager Premier 5-year subscription applicable to the product purchased only at the time of product purchase and with product registration at that time in Digi Remote Manager.
| ENTERPRISE SOFTWARE | DESCRIPTION |
|---|---|
| PROTOCOL SUPPORT | HTTP, HTTPS, FTP, SFTP, SSL, SNMP, SNMP (v1/v2c/v3), SSH, Telnet and CLI for web management; remote management via Digi Remote Manager; SMS management, protocol analyzer, ability to capture PCAP for use with Wireshark; DynDNS, Dynamic DNS client compatible with BIND9/No-IP/DynDNS |
| SECURITY/VPN | IP filtering, stateful inspection firewall with scripting, address and port translation; VPN: IPSec with IKEv1, IKEv2, NAT Traversal; SSL, SSLv2, SSLv3, FIPS 197, Open VPN client and server; PPTP, L2TP; (5) VPN tunnels (not upgradable); cryptology: SHA-1, MD5, RSA; encryption: DES, 3DES and AES up to 256-bit (CBC mode for IPsec); authentication: RADIUS, TACACS+, SCEP for X.509; certificates; content filtering (via 3rd party); MAC address filtering; VLAN support |
| ROUTING/FAILOVER | IP pass-through; NAT, NAPT with IP port forwarding; Ethernet bridging; GRE; multicast routing; routing protocols: PPP, PPPoE, RIP (v1, v2) OSPF, SRI, BGP, iGMP routing (multicast); IP failover: VRRP, VRRP+TM; automatic failover/failback to second GSM network/standby APN |
| OTHER PROTOCOLS | DDHCP; Dynamic DNS client compatible with BIND9/No-IP/DynDNS; QoS via TOS/DSCP/WRED; Modbus UDP/TCP to serial; X.25 including XOT, SNA/IP, TPAD and PAD; protocol switch; Modbus bridging for connecting diverse field assets |
