Products - Lantronix NM2-FXS-2230-SFP-201 – M.2 Fast Ethernet Fiber Network Interface Card for Dell OptiPlex
Hot
Lantronix NM2-FXS-2230-SFP-201 – M.2 Fast Ethernet Fiber Network Interface Card for Dell OptiPlex
Lantronix NM2-FXS-2230-SFP-201 – M.2 Fast Ethernet Fiber Network Interface Card for Dell OptiPlex™ 7070 & 7060/5060/3060 Micro PCs
100Base-FX to SGMII SFP media converter (included)
Lantronix M.2 Fast Ethernet Fiber Network Interface Card (NIC) provides a fiber optic interface for the Dell OptiPlex™ 7060, 5060, and 3060 Micro PCs. The NM2-FXS-2230-SFP-201 consists of a M.2 NIC that installs into the OptiPlex Micro PC’s M.2 “A or E keyed” interface, a fiber optic adapter that installs into the OptiPlex Micro PC’s Option port, and a 20-pin Flat Flex Cable (FFC) that connects the NIC to the fiber adapter. The fiber optic adapter is an open SFP with a 100Base-FX to SGMII SFP Module (included).
- Description
- Datasheet
- Technical Specifications
Description
NM2-FXS-2230-SFP-201 Overview
Features
- PCI Express M.2 compliant
- A + E keyed M.2 interface
- Full duplex
- Flow control
- Wake on LAN (WOL)
- Smart Load Balancing (SLB)
- TCP Segmentation Offload (TSO)
- Message Signaled Interrupts (MSI)
- Extended Message-Signaled Interrupts (MSI-X)
- LACP support (Teaming)
- IPv6 Capable
- Supports UEFI
- Supports PXE boot
- Jumbo frame support 9014 bytes
- 100Base-FX to SGMII SFP interface
Lantronix NM2-FXS-2230-SFP-201 – M.2 Fast Ethernet Fiber Network Interface Card for Dell OptiPlexTech Specs
Standards
- IEEE 802.3-2012
Bus Slot
- M.2 – ‘2230-D4-A-E’
Data Rate
- 100 Mbps (full duplex only)
Max Frame Size
- 9014 bytes
Status LEDs
- LINK/ACT
- ON = Link
- Flashing = Activity
Dimensions
- M.2 NIC
- 2230-D4-A-E
- Width: 0.87” [22 mm]
- Depth: 1.18” [30 mm]
- Height: 0.12” [3.08 mm]
- Fiber Interface)
- Width: 1.65” [42 mm]
- Depth: 2.05” [52 mm]
- Height: 0.51” [13 mm]
- FFC Cable
- Length: 2.99” [76 mm]
Software Support
- Windows 10, 8, 8.1, and 7 (32/64 bit); Linux
Power Consumption
- 120mA @ 3.3V (0.4 Watts typical without SFP module)
- SFP: 330mA @ 3.3V (1 Watt typical)
Power Source
- M.2 interface connector: 3.3V (Refer to table 41 of M.2 Specification)
Environment
- Operating: 0°C to +45°C
- Storage: -40°C to 85°C
- Humidity: 5% to 95% (non-condensing)
- Altitude: 0 – 10,000 ft.
Weight
- 0.1 lbs. [0.05 kg]
Certifications
- CE Mark; Emissions: EN55032, FCC Part 15 Class A; Immunity: EN55024
Warranty
- Lifetime
