Digi Connect EZ 4i – Serial server, 4-port, industrial-rated, with Wi-Fi and accessories

Hot

Digi Connect EZ 4i – Serial server, 4-port, industrial-rated, with Wi-Fi and accessories

SKU: EZ04-IA00-EXT Category: Tag:

Click-to-connect | Modern, secure serial connectivity that boots in seconds, configures in minutes and runs for years

  • 1, 2 or 4 software-selectable RS-232/422/485 serial ports to connect a wide variety of serial equipment over IP networks
  • 10/100/1000 Ethernet (dual Ethernet on 2- and 4-port), with optional Wi-Fi, industrial temp, C1D2 rating and LTE
  • Ideal for applications requiring COM ports, serial tunneling or TCP/UDP sockets
  • Optimizes performance for the widest range of industry standard and device-specific protocols
  • Built-in Digi TrustFence® for device security, secure encrypted connections, ongoing monitoring and support
  • Easy setup and mass configuration with Digi Navigator™ and Digi Remote Manager®

Serial server, 4-port, Industrial-rated, with accessories, Wi-Fi (SKU: EZ04-IA00-EXT)

Serial server, 4-port, Industrial-rated, with accessories, LTE, Wi-Fi (SKU: EZ04-IAG4-EXT)

Clear

Digi Connect EZ 4i – Serial server, 4-port, industrial-rated, with Wi-Fi and accessories

In stock

Description

Model: Digi Connect EZ 4i

  • Software and management: 
    • Remote management: Digi Remote Manager®, SNMP v3 (user installed/managed)
    • Local management: Digi Navigator™ discovery and configuration tool, Web UI (HTTP/HTTPS); CLI (Telnet, SSH)
    • Management / troubleshooting tools: Digi Navigator discovery and configuration tool, FTP client, SCP, protocol analyzer with PCAP for Wireshark, event logging with syslog and SMTP client, NTP/SNTP, Nagios, Intelliflow, iPerf, Dynamic DNS, ping, traceroute
    • Memory: 256 MB RAM, 4 GB Flash
  • Security:
    • Authentication: TACACS+, LDAP, Enterprise RADIUS
  • Ethernet: 
    • Ports: (2) RJ-45; 10/100/1000 Mbps (auto-sensing)
  • Serial: 
    • ​​Ports: (4) RJ45-10; RS-232 DTE/RS-422/RS-485 capable, software selectable
    • RS-232 / EIA-232 Serial Modes: Signal support TXD, RXD, RTS, CTS, DTR, DSR, DCD, RI flow control options: XON/OFF, CTS/RTS, RTS-toggle
    • RS-422 / EIA-422 Serial Modes: TX+/-, RX+/-, software termination, pre-delay/post-delay
    • RS-485 / EIA-485 Serial Modes: Data+/Data-, software termination, pre-delay/post-delay
  • Wi-Fi: 
    • Module: 1 x 1 SISO dual-band 802.11a/b/g/n/ac (2.4 GHz / 5 GHz)
    • Modes: Client mode and access point mode simultaneously
    • Clients: Maximum 10 clients (access point mode: regardless of combination of clients and access points)
    • Access points: Maximum 2 access points (access point mode: regardless of combination of clients and access points)
    • Security: WPA-3/WPA-2 personal, WPA/WPA-2 enterprise
    • Connectors: (1) 50 Ω SMA (center pin: male)
  • Physical:
    • Dimensions (L x W x H): 19.2 x 13.4 x 3.5 cm (7.56 x 5.28 x 1.38 in)
    • Package dimensions: 35.5 x 20.4 x 6.7 cm (13.98 x 8.03 x 2.64 in)
    • Package weight: 1.3 kg (2.87 lb)
    • Status LEDs: Each Ethernet and serial port has two status LEDs; power, signal, Wi-Fi, Ethernet, serial
  • Power requirements:
    • Power input: Phoenix connector: 9 – 30 VDC, Connector: 2-position rewireable plug with securing screws included
    • Power consumption: 9 V @ 1.5 A max, 4.5 W typical without Digi CORE modem
  • Environmental:
    • Operating temperature:
      • Standard operating temperature of Connect EZ device: -35° to 74° C (-31° to 165° F)
    • Relative humidity: 5% to 95% (non-condensing)
  • Approvals: 
    • Safety: IEC62368-1, CB, EN62311
    • Industrial certification: Class 1, Division 2
    • Environmental: ROH53
    • Emissions / Immunity: CE; RED; FCC Part 15, Subpart B; ICES-003; AU/NZS CISPR32
  • Product warranty: 5-year for base Connect EZ device
  • Accessories: Includes 2.4 and 5 GHz antenna, power supply and DIN rail clip (DIN rail bracket available separately – 76002093)
What’s in the box
  • Digi Connect EZ 4i  – serial server, 4-port, industrial-rated, with Wi-Fi and accessories
  • Antenna – 2.4 and 5 GHz (29000938)
  • Power supply – 12 V, 2.5 A (76002079)
  • DIN rail clip (76002095)
SPECIFICATIONS Digi Connect EZ EZ Mini EZ 2 EZ 4 EZ 4i
SOFTWARE AND MANAGEMENT
REMOTE MANAGEMENT Digi Remote Manager®; SNMP v3 (user installed/managed)
LOCAL MANAGEMENT Digi Navigator™ discovery and configuration tool, Web UI (HTTP/HTTPS), CLI (Telnet, SSH)
MANAGEMENT / TROUBLESHOOTING TOOLS Digi Navigator discovery and configuration tool, FTP client, SCP, protocol analyzer with PCAP for Wireshark, event logging with syslog and SMTP client, NTP/SNTP, Nagios, Intelliflow, iPerf, Dynamic DNS, ping, traceroute
MEMORY 256 MB RAM, 4 GB Flash
SECURITY
AUTHENTICATION TACACS+, LDAP, Enterprise RADIUS
ETHERNET
PORTS RJ-45, 10/100/1000 Mbps (auto-sensing) 1-port 2-port 2-port 2-port
SERIAL SIGNAL CAPABILITIES
PORTS RS-232 DTE/RS-422/RS-485 capable, software selectable (1) DB9 (2)RJ45-10 (4) RJ45-10 (4) RJ45-10
RS-232 / EIA-232 SERIAL MODES Signal support TXD, RXD, RTS, CTS, DTR, DSR, DCD, RI flow control options: XON/OFF, CTS/RTS, RTS-toggle
RS-422 / EIA-422 SERIAL MODES TX+/-, RX+/-, software termination, pre-delay/post-delay
RS-485 / EIA-485 SERIAL MODES Data+/Data-, software termination, pre-delay/post-delay
CELLULAR
CERTIFICATIONS Visit www.digi.com/resources/certifications for latest certifications When used with Digi CORE plug-in LTE modem
LTE (G4) WITH DIGI CORE PLUG-IN LTE MODEM 1002-CMG4 LTE Cat 4: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B38, B40, B41; 3G: B1, B2, B4, B5, B6, B8, B19;
2G EDGE / GPRS: 850 / 900 / 1800 / 1900 MHz
CONNECTORS (1) 50 Ω SMA (center pin: female)
SIM SLOTS (2) Mini-SIM (2FF)
SIM SECURITY Secured in cellular module
WI-FI
MODULE 1 x 1 SISO dual-band 802.11a/b/g/n/ac (2.4 GHz / 5 GHz)
MODES Client mode and access point mode simultaneously
CLIENTS Maximum 10 clients (access point mode: regardless of combination of clients and access points)
ACCESS POINTS Maximum 2 access points (access point mode: regardless of combination of clients and access points)
SECURITY WPA-3/WPA-2 personal, WPA/WPA-2 enterprise
CONNECTORS (1) 50 Ω SMA (center pin: male)
PHYSICAL
DIMENSIONS (L x W x H) 13.7 x 9.5 x 3 cm (5.39 x 3.74 x 1.18 in) 19.2 x 13.4 x 3.5 cm (7.56 x 5.28 x 1.38 in)
PACKAGE DIMENSIONS 21.4 x 18.4 x 6.5 cm (8.43 x 7.24 x 2.56 in) 35.5 x 20.4 x 6.7 cm (13.98 x 8.03 x 2.64 in)
PACKAGE WEIGHT 0.6 kg (1.32 lb) 1.3 kg (2.87 lb)
STATUS LEDs Each Ethernet and Serial port has two status LEDs Power, Serial Power, Signal, LTE, Ethernet, Serial Power, Signal, LTE, Wi-Fi, Ethernet, Serial
POWER REQUIREMENTS
POWER INPUT Locking barrel: 9 – 30 VDC, locking 2.1 mm center barrel connector
Phoenix connector: 9 – 30 VDC, Connector: 2-position rewireable plug with securing screws included
POWER CONSUMPTION 9 V @ 1 A max, typical 1.7 W 9 V @ 1.5 A max, 5 W typical with Digi CORE modem, 4.5 W typical without Digi CORE modem
ENVIRONMENTAL
OPERATING TEMPERATURE Standard operating temperature of Connect EZ device 0° C to 40° C (32° F to 104° F) 0° C to 40° C (32° F to 104° F) 0° C to 40° C (32° F to 104° F) -35° C to 74° C (-31° F to 165° F)
With Digi CORE plug-in LTE modem 0° C to 40° C (32° F to 104° F) 0° C to 40° C (32° F to 104° F) -35° C to 70° C (-31° F to 158° F)
RELATIVE HUMIDITY 5% to 95% (non-condensing)
APPROVALS
CELLULAR Visit www.digi.com/resources/certifications for latest certifications
SAFETY IEC62368-1, IEC60950-1, CB, EN62311, UL62368-1, UL60950-1
INDUSTRIAL CERTIFICATION Class 1, Division 2
ENVIRONMENTAL RoHS3
EMISSIONS / IMMUNITY CE; RED; FCC Part 15, Subpart B; ICES-003; AU/NZS CISPR32
WARRANTY
PRODUCT WARRANTY 5-year for base Connect EZ device, 3-year for Digi CORE plug-in LTE modem

 

ENTERPRISE SOFTWARE DESCRIPTION
NETWORK PROTOCOL SUPPORT HTTPS, FTP client, SSL, TLS v1.2, SCP (client and server), SFTP, SMTP client for use by scripts and the command line, SNMP (v2/v3), SSH, remote management via Digi Remote Manager® ; Protocol analyzer, ability to capture PCAP for use with Wireshark; DynDNS,Dynamic DNS client compatible with BIND9/No-IP/DynDNS; Captive portal, Intelliflow; Nagios, DNS server, NTP server, Multicast, mDNS, IPerf
SERIAL AND DATA PROTOCOL SUPPORT RealPort, Socket and Autoconnect Socket Connectivity for TCP and Encrypted TCP, SSH, Telnet, UDP, Modbus, Pyserial support via built-in Python interpreter
SECURITY IP filtering, stateful firewall, custom firewall rules (iptables), address and port translation; TLS 1.2 and above, FIPS 197, open VPN client and server; VPN tunnels; Authentication: RADIUS, TACACS+; certificates; MAC address filtering; VLAN support
VPN IPsec with IKEv1, IKEv2, NAT Traversal; OpenVPN client and server; GRE VPN tunnels; Cryptology: SHA-1/256/384/512, MDS, RSA; Encryption: 3DES and AES up to 256-bit (CBC mode for IPsec); Diffie Hellman: DH groups 1-32 (CURVE448)
ROUTING / FAILOVER IP pass-through; NAT, NAPT with IP port forwarding; Ethernet bridging; GRE; Multicast routing; Routing protocols: RIP (v1, v2) OSPF, BGP, IP failover: VRRP; automatic failover; Digi SureLink®
OTHER PROTOCOLS DHCP; dynamic DNS client compatible with No-IP/DynDNS