Products - Lantronix C6210 Series ION DS3-T3/E3 Network Interface Device Module, DS3 – T3/E3 Coax over Fiber
- Home
- Fibre & Ethernet, Media Converters
- Lantronix C6210 Series ION DS3-T3/E3 Network Interface Device Module, DS3 – T3/E3 Coax over Fiber




Lantronix C6210 Series ION DS3-T3/E3 Network Interface Device Module, DS3 – T3/E3 Coax over Fiber
The ION C6210 is a managed media converter module that provides a solution for those users that need to extend DS3-T3/E3 connections over fiber. The C6210 is available in versions that support fixed fiber connectors as well as SFP fiber modules offering support for a variety of fiber types, distances, and wavelengths to provide maximum flexibility across a variety of network topologies. CWDM SFPs can also be utilized to further increase the bandwidth capacity of the fiber infrastructure.
The C6210 DS3-T3/E3 converters must be used in pairs. A typical installation will include a modular card installed in a managed ION chassis linked over fiber to a stand-alone S6210 in a remote location.

Lantronix C6210 Series ION DS3-T3/E3 Network Interface Device Module, DS3 – T3/E3 Coax over Fiber
- Description
- Additional information
- Tech Specs
Description
(2) 10GBase-X SFP+ slot (empty) + (1) 10/100/1000Base-T RJ-45 ports
Features
- Full non-blocking switching on all interfaces
- (2) 10 Gig SFP+ ports supporting 100FX, 1000X, SGMII, and 10 Gig
- SFP ports individually support same or different speeds simultaneously
- (1) 10/100/1000Base-T port
- Local and remote units can be fully managed by the ION platform
- IPv4 IP TOS, DiffServ and IPv6 traffic class QoS classification via IONMM
- Bandwidth Allocation, per port, from 1 Gig to 10 Gig in 1 Gig increments
- Basic VLAN support
- Jumbo frame support, up to 10,240 bytes
- 16K maximum MAC Addresses
- 8Mbit shared buffer memory
- Remote firmware upgrades
- Auto-MDI/MDIX
- Auto-Negotiation
- SFP+ DMI monitoring (no vendor specific information)
- Pause
- Can be used in the ION 19-Slot, 6-Slot, and 1-Slot chassis
- Management provided by IONMM
- DHCP client
- Telnet
- Command Line Interface (CLI)
- Web management
- SNMP v1, v2c, and v3
- Management VLAN
Additional information
Products | C6210-3013, C6210-3014, C6210-3040 |
---|
Standards
- ANSI
- ITU-TS
- ETSI
- G.823 for jitter tolerance
- G.755 for loss of signal
Connectors
- Coax Connectors 75 ohm coax
- Fiber Connectors SFP: LC connector Uses standard 100Base-X/OC-3
- SFP Fixed Optics: ST or SC connector
Data Rate
- DS3/T3 = 44.7 Mbps; E3 = 34.4 Mbps
Status LEDs
- Power, Coax link status, coax loopback status, AIS on coax link; Fiber link status, fiber loopback status, AIS on fiber link
Dimensions
- Width: 0.86” [22 mm]
- Depth: 6.5” [165 mm]
- Height: 3.4” [86 mm]
Power Consumption
- 2.5 Watts
Environment
- Environment specs are dependent on the chassis chosen
- Operating: 0°C to 50°C
- Humidity: 5% to 95% (non-condensing)
- Altitude: 0 – 10,000 ft.
Weight
- 1 lb. [0.45 kg]
MTBF
- Greater than 250,000 hours (MIL-HDBD-217F)
- Greater than 687,000 hours (Bellcore)
Certifications
- CISPR/EN55022 Class A, FCC Class A, CE Mark
Warranty
- Lifetime