Lantronix SM24TAT4XB Managed Gigabit Ethernet PoE+ Switch

Lantronix SM24TAT4XB Managed Gigabit Ethernet PoE+ Switch

SKU: SM24TAT4XB Category:

This switch is a high performance managed PoE+ switch with (24) 10/100/1000 copper ports and (4) dual speed 1G/10G SFP+ slots.

Lantronix SM24TAT4XB Managed Gigabit Ethernet PoE+ Switch

In stock



  • Supports Jumbo Frame up to 10240 bytes
  • Authentication – RADIUS IEEE 802.1X, TACACS+
  • Security – Support SSH/SSL
  • Port based or tagged (IEEE 802.1Q) VLAN, MAC based VLAN, Management VLAN and Private VLAN Edge
  • DHCP Server, Client, Relay
  • IEEE 1588v2 PTP (TC)
  • ACLs Support for up to 512 entries, drop or rate limitation based on source and destination MAC, VLAN ID or IP address, protocol, port, DSCP/IP precedence, TCP/IP source and destination ports, IEEE 802.1p priority, Ethernet Type / IGMP packets, TCP flag
  • LLDP (Link Layer Discovery Protocol)
  • IEEE 802.3az Energy Efficiency
  • Web Management, SNMP V1/V2c/V3, Telnet, CLI
  • Supports IEEE 802.3ad port trunk with link aggregation control protocol (LACP). Supports up to 26 groups with (4) ports per group.
  • Supports IGMP Snooping V1/V2/V3, up to 1024 multicast groups, GVRP, IGMP Proxy, IGMP Querier
  • MLD snooping V1/V2: deliver IPv6 multicast packages only to the required receivers
  • Supports 8 hardware queues, Strict priority and WRR. Queue assignment based on DSCP and IEEE 802.1p CoS; IPv4/IPv6 precedence/ Type of Service / DiffServ / classification and remarking ACLs; rate limiting, ingress policer, egress shaping and rate control
  • IEEE 802.1s MSTP, IEEE 802.1w RSTP and IEEE 802.1D STP Compliant
  • Firmware Update, configure backup/restore through web GUI and TFTP
  • Supports IPv4/IPv6 Layer 3 static routing
  • ITU-T G.8031, G8032, loop detection

PoE Features

  • Compliant with IEEE 802.3at PoE+
  • Compliant with IEEE 802.3af PoE
  • IEEE 802.1AB LLDP-MED Configuration
  • Auto Power Reset
  • DHCP per port
  • Always on PoE

Device Management System (DMS) Features

  • Graphical Monitoring – Topology view, Floor view, Map view
  • Traffic Monitoring
  • Troubleshooting – Network diagnostic, protection mechanism, performance and link management