Lantronix S6010 Series Stand-alone DS1 – T1/E1 Remotely Managed NID

Lantronix S6010 Series Stand-alone DS1 – T1/E1 Remotely Managed NID

SKU: S6010-1011 Category:

The ION S6010 is a stand-alone managed media converter that offers a solution for extending DS1 – T1/E1 or PRI connections over fiber optic cabling. It provides fiber extension though a twisted pair RJ-48 port and a fiber port. These DS1 – T1/E1 converters must be used in pairs, one on each end of the fiber link. Management of the stand-alone converter is supported, in-band, over the fiber, when the remote S6010 is linked to a C6010 card installed in a managed ION Chassis. These DS1 – T1/E1 converters are available with fixed fiber connectors or an open SFP slot, with support for various fiber types, distances, and wavelengths to provide maximum flexibility for any network topology. CWDM SFPs can also be used to further increase the bandwidth capacity of the fiber infrastructure.


Lantronix S6010 Series Stand-alone DS1 – T1/E1 Remotely Managed NID

In stock


Stand-alone DS1 – T1/E1 Remotely Managed NID
DS1 – T1/E1 over Fiber

  • Remote in-band management
  • Local or Remote Loopbacks – Copper or Fiber
  • Switch selectable for T1 or E1
  • Remote firmware upgrade
  • LEDs for immediate visual status
  • Supports dual or single fiber
  • Supports multimode and single mode fiber at a variety of distances
  • Supports CWDM SFPs
  • SNMP management when used with ION chassis and management module
  • Remote stand-alone can be managed by local peer
  • Extend PRI over fiber
  • Must be used in pairs


  • ANSI T1.102
  • T1.402
  • T1.408
  • ITU I.431
  • G.703
  • G.736
  • G.775
  • G.823
  • ETSI 300-166
  • 300-233
  • TBR12/12


  • Copper Connectors RJ-48, BNC
  • Fiber Connectors SFP: LC connector Uses standard 100Base-X/OC-3
  • SFP Fixed Optics: ST or SC connector

Data Rate

  • T1 = 1.544 Mbit/s, E1 = 2.048 Mbit/s

Status LEDs

  • Power, Signal Detect Copper, Signal Detect Fiber


  • Width: 3.25” [82 mm]
  • Depth: 6.5” [165 mm]
  • Height: 1″ [25 mm]

Power Consumption

  • 2.6 Watts

Power Input

  • 100-240 VAC

Power Output

  • 12 VDC


  • Operating: -10°C to 65°C
  • Humidity: 5% to 95% (non-condensing)
  • Altitude: 0 – 10,000 ft.


  • 2 lbs. [0.90 kg]


  • With Power Supply:
    Greater than 41,660 hours (MIL-HDBD-217F)
    Greater than 114,580 hours (Bellcore)
  • Without Power Supply:
    Greater than 250,000 hours (MIL-HDBD-217F)
    Greater than 687,000 hours (Bellcore)


  • CISPR/EN55022 Class A, FCC Class A, CE Mark, UL60950


  • Lifetime