Products - Digi Connect EZ 2 – Serial server, 2-port, with accessories
Hot
Digi Connect EZ 2 – Serial server, 2-port, with accessories
Click-to-connect | Modern, secure serial connectivity that boots in seconds, configures in minutes and runs for years
- 1, 2 or 4 software-selectable RS-232/422/485 serial ports to connect a wide variety of serial equipment over IP networks
- 10/100/1000 Ethernet (dual Ethernet on 2- and 4-port), with optional Wi-Fi, industrial temp, C1D2 rating and LTE
- Ideal for applications requiring COM ports, serial tunneling or TCP/UDP sockets
- Optimizes performance for the widest range of industry standard and device-specific protocols
- Built-in Digi TrustFence® for device security, secure encrypted connections, ongoing monitoring and support
- Easy setup and mass configuration with Digi Navigator™ and Digi Remote Manager®
Serial server, 2-port, with accessories (SKU: EZ02-CA00-GLB)
Serial server, 2-port, with accessories, LTE (SKU: EZ02-CAG4-GLB)
- Description
- Datasheet
- Technical Specifications
Description
Model: Digi Connect EZ 2
- Software and management:
- Remote management: Digi Remote Manager®, SNMP v3 (user installed/managed)
- Local management: Digi Navigator™ discovery and configuration tool, Web UI (HTTP/HTTPS); CLI (Telnet, SSH)
- Management / troubleshooting tools: Digi Navigator discovery and configuration tool, FTP client, SCP, protocol analyzer with PCAP for Wireshark, event logging with syslog and SMTP client, NTP/SNTP, Nagios, Intelliflow, iPerf, Dynamic DNS, ping, traceroute
- Memory: 256 MB RAM, 4 GB Flash
- Security:
- Authentication: TACACS+, LDAP, Enterprise RADIUS
- Ethernet:
- Ports: (2) RJ-45; 10/100/1000 Mbps (auto-sensing)
- Serial:
- Ports: (2) RJ45-10; RS-232 DTE/RS-422/RS-485 capable, software selectable
- RS-232 / EIA-232 Serial Modes: Signal support TXD, RXD, RTS, CTS, DTR, DSR, DCD, RI flow control options: XON/OFF, CTS/RTS, RTS-toggle
- RS-422 / EIA-422 Serial Modes: TX+/-, RX+/-, software termination, pre-delay/post-delay
- RS-485 / EIA-485 Serial Modes: Data+/Data-, software termination, pre-delay/post-delay
- Physical:
- Dimensions (L x W x H): 19.2 x 13.4 x 3.5 cm (7.56 x 5.28 x 1.38 in)
- Package dimensions: 35.5 x 20.4 x 6.7 cm (13.98 x 8.03 x 2.64 in)
- Package weight: 1.3 kg (2.87 lb)
- Status LEDs: Each Ethernet and serial port has two status LEDs; power, signal, Ethernet, serial
- Power requirements:
- Power input: Locking barrel: 9 – 30 VDC, locking 2.1 mm center barrel connector
- Power consumption: 9 V @ 1.5 A max, 4.5 W typical without Digi CORE modem
- Environmental:
- Operating temperature:
- Standard operating temperature of Connect EZ device: 0° to 40° C (32° to 104° F)
- Relative humidity: 5% to 95% (non-condensing)
- Operating temperature:
- Approvals:
- Safety: IEC62368-1, CB, EN62311
- Environmental: ROH53
- Emissions / Immunity: CE; RED; FCC Part 15, Subpart B; ICES-003; AU/NZS CISPR32
- Product warranty: 5-year for base Connect EZ device
- Accessories: Includes power supply and DIN rail clip (DIN rail bracket available separately – 76002093)
What’s in the box
- Digi Connect EZ 2 – serial server, 2-port, with accessories
- Power supply – 12 V, 3 A (24000136)
- DIN rail clip (76002095)
| SPECIFICATIONS | Digi Connect EZ | EZ Mini | EZ 2 | EZ 4 | EZ 4i |
|---|---|---|---|---|---|
| SOFTWARE AND MANAGEMENT | |||||
| REMOTE MANAGEMENT | Digi Remote Manager®; SNMP v3 (user installed/managed) | ✓ | ✓ | ✓ | ✓ |
| LOCAL MANAGEMENT | Digi Navigator™ discovery and configuration tool, Web UI (HTTP/HTTPS), CLI (Telnet, SSH) | ✓ | ✓ | ✓ | ✓ |
| MANAGEMENT / TROUBLESHOOTING TOOLS | Digi Navigator discovery and configuration tool, FTP client, SCP, protocol analyzer with PCAP for Wireshark, event logging with syslog and SMTP client, NTP/SNTP, Nagios, Intelliflow, iPerf, Dynamic DNS, ping, traceroute | ✓ | ✓ | ✓ | ✓ |
| MEMORY | 256 MB RAM, 4 GB Flash | ||||
| SECURITY | |||||
| AUTHENTICATION | TACACS+, LDAP, Enterprise RADIUS | ✓ | ✓ | ✓ | ✓ |
| ETHERNET | |||||
| PORTS | RJ-45, 10/100/1000 Mbps (auto-sensing) | 1-port | 2-port | 2-port | 2-port |
| SERIAL SIGNAL CAPABILITIES | |||||
| PORTS | RS-232 DTE/RS-422/RS-485 capable, software selectable | (1) DB9 | (2)RJ45-10 | (4) RJ45-10 | (4) RJ45-10 |
| RS-232 / EIA-232 SERIAL MODES | Signal support TXD, RXD, RTS, CTS, DTR, DSR, DCD, RI flow control options: XON/OFF, CTS/RTS, RTS-toggle | ✓ | ✓ | ✓ | ✓ |
| RS-422 / EIA-422 SERIAL MODES | TX+/-, RX+/-, software termination, pre-delay/post-delay | ✓ | ✓ | ✓ | ✓ |
| RS-485 / EIA-485 SERIAL MODES | Data+/Data-, software termination, pre-delay/post-delay | ✓ | ✓ | ✓ | ✓ |
| CELLULAR | |||||
| CERTIFICATIONS | Visit www.digi.com/resources/certifications for latest certifications | – | When used with Digi CORE plug-in LTE modem | ||
| LTE (G4) WITH DIGI CORE PLUG-IN LTE MODEM 1002-CMG4 | LTE Cat 4: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B38, B40, B41; 3G: B1, B2, B4, B5, B6, B8, B19; | ||||
| 2G EDGE / GPRS: 850 / 900 / 1800 / 1900 MHz | |||||
| CONNECTORS | (1) 50 Ω SMA (center pin: female) | ||||
| SIM SLOTS | (2) Mini-SIM (2FF) | ||||
| SIM SECURITY | Secured in cellular module | ||||
| WI-FI | |||||
| MODULE | 1 x 1 SISO dual-band 802.11a/b/g/n/ac (2.4 GHz / 5 GHz) | – | – | ✓ | ✓ |
| MODES | Client mode and access point mode simultaneously | – | – | ✓ | ✓ |
| CLIENTS | Maximum 10 clients (access point mode: regardless of combination of clients and access points) | – | – | ✓ | ✓ |
| ACCESS POINTS | Maximum 2 access points (access point mode: regardless of combination of clients and access points) | – | – | ✓ | ✓ |
| SECURITY | WPA-3/WPA-2 personal, WPA/WPA-2 enterprise | – | – | ✓ | ✓ |
| CONNECTORS | (1) 50 Ω SMA (center pin: male) | – | – | ✓ | ✓ |
| PHYSICAL | |||||
| DIMENSIONS (L x W x H) | 13.7 x 9.5 x 3 cm (5.39 x 3.74 x 1.18 in) | 19.2 x 13.4 x 3.5 cm (7.56 x 5.28 x 1.38 in) | |||
| PACKAGE DIMENSIONS | 21.4 x 18.4 x 6.5 cm (8.43 x 7.24 x 2.56 in) | 35.5 x 20.4 x 6.7 cm (13.98 x 8.03 x 2.64 in) | |||
| PACKAGE WEIGHT | 0.6 kg (1.32 lb) | 1.3 kg (2.87 lb) | |||
| STATUS LEDs | Each Ethernet and Serial port has two status LEDs | Power, Serial | Power, Signal, LTE, Ethernet, Serial | Power, Signal, LTE, Wi-Fi, Ethernet, Serial | |
| POWER REQUIREMENTS | |||||
| POWER INPUT | Locking barrel: 9 – 30 VDC, locking 2.1 mm center barrel connector | ✓ | ✓ | ✓ | – |
| Phoenix connector: 9 – 30 VDC, Connector: 2-position rewireable plug with securing screws included | – | – | – | ✓ | |
| POWER CONSUMPTION | 9 V @ 1 A max, typical 1.7 W | 9 V @ 1.5 A max, 5 W typical with Digi CORE modem, 4.5 W typical without Digi CORE modem | |||
| ENVIRONMENTAL | |||||
| OPERATING TEMPERATURE | Standard operating temperature of Connect EZ device | 0° C to 40° C (32° F to 104° F) | 0° C to 40° C (32° F to 104° F) | 0° C to 40° C (32° F to 104° F) | -35° C to 74° C (-31° F to 165° F) |
| With Digi CORE plug-in LTE modem | – | 0° C to 40° C (32° F to 104° F) | 0° C to 40° C (32° F to 104° F) | -35° C to 70° C (-31° F to 158° F) | |
| RELATIVE HUMIDITY | 5% to 95% (non-condensing) | ✓ | ✓ | ✓ | ✓ |
| APPROVALS | |||||
| CELLULAR | Visit www.digi.com/resources/certifications for latest certifications | ||||
| SAFETY | IEC62368-1, IEC60950-1, CB, EN62311, UL62368-1, UL60950-1 | ✓ | ✓ | ✓ | ✓ |
| INDUSTRIAL CERTIFICATION | Class 1, Division 2 | – | – | – | ✓ |
| ENVIRONMENTAL | RoHS3 | ✓ | ✓ | ✓ | ✓ |
| EMISSIONS / IMMUNITY | CE; RED; FCC Part 15, Subpart B; ICES-003; AU/NZS CISPR32 | ✓ | ✓ | ✓ | ✓ |
| WARRANTY | |||||
| PRODUCT WARRANTY | 5-year for base Connect EZ device, 3-year for Digi CORE plug-in LTE modem | ||||
| ENTERPRISE SOFTWARE | DESCRIPTION |
|---|---|
| NETWORK PROTOCOL SUPPORT | HTTPS, FTP client, SSL, TLS v1.2, SCP (client and server), SFTP, SMTP client for use by scripts and the command line, SNMP (v2/v3), SSH, remote management via Digi Remote Manager® ; Protocol analyzer, ability to capture PCAP for use with Wireshark; DynDNS,Dynamic DNS client compatible with BIND9/No-IP/DynDNS; Captive portal, Intelliflow; Nagios, DNS server, NTP server, Multicast, mDNS, IPerf |
| SERIAL AND DATA PROTOCOL SUPPORT | RealPort, Socket and Autoconnect Socket Connectivity for TCP and Encrypted TCP, SSH, Telnet, UDP, Modbus, Pyserial support via built-in Python interpreter |
| SECURITY | IP filtering, stateful firewall, custom firewall rules (iptables), address and port translation; TLS 1.2 and above, FIPS 197, open VPN client and server; VPN tunnels; Authentication: RADIUS, TACACS+; certificates; MAC address filtering; VLAN support |
| VPN | IPsec with IKEv1, IKEv2, NAT Traversal; OpenVPN client and server; GRE VPN tunnels; Cryptology: SHA-1/256/384/512, MDS, RSA; Encryption: 3DES and AES up to 256-bit (CBC mode for IPsec); Diffie Hellman: DH groups 1-32 (CURVE448) |
| ROUTING / FAILOVER | IP pass-through; NAT, NAPT with IP port forwarding; Ethernet bridging; GRE; Multicast routing; Routing protocols: RIP (v1, v2) OSPF, BGP, IP failover: VRRP; automatic failover; Digi SureLink® |
| OTHER PROTOCOLS | DHCP; dynamic DNS client compatible with No-IP/DynDNS |
