Description

• Unit and Port LEDs provide quick status
• Auto-Negotiation
• Fixed Full-Duplex on fiber
• Auto-MDI/MDIX
• Link Pass Through
• Active Link Pass Through on SFP version
• Automatic Link Restoration
• Far-End-Fault (FEF)
• DC and AC power inputs via terminal block
  • If the voltage of your power source doesn’t match the device input power, external power supplies are available
• Includes barrel connector pig-tail cable
• Overload Current Protection
• Reverse Polarity Protection
• Easily integrate fiber into industrial, hardened, or outdoor locations to reach devices at the edge of the network
• Small mechanical size allows use in enclosures with space constraints
• No configuration required
• Available with LC, ST or SC fiber interfaces and available for multimode or single mode fiber
• Multiple mounting options:
  • DIN Rail clip and velcro included
  • Wall mount bracket sold separately

Standards

• IEEE 802.3

Max Frame Size

• 2,046 bytes (for all excpet SFP version)
• 10,240 bytes (for SFP version)

Status LEDs

• PWR (Power): (below RJ-45)
• FX-Link/Act (Fiber Link/Activity): (Upper Left on RJ-45)
• ON = Link; Flashing = Activity
• TX-Link/Act (Copper Link/Activity): (Upper Right on RJ-45)
• ON = Link; Flashing = Activity

Dimensions

• Width: 1.8” [46 mm]
• Depth: 3.3” [85 mm]
• Height: 0.85” [22 mm]

Power Consumption

• 2.5 Watts

Power Input

• 2-pin Terminal Block
• Unit accepts 12-48 VDC and 24-36 VAC ± 10%
• Overload Current Protection
• Reverse Polarity Protection

Ingress Protection

• IP20

Environment

• Operating: -40°C to 75°C
• Storage: -40°C to 85°C
• Humidity: 5% to 95% (non-condensing)
• Altitude: 0 – 10,000 ft.

Weight

• 2 lbs. [0.90 kg]

MTBF

• 41,680 hours (MIL‐HDBK‐217F)
• 114,580 hours (Bellcore7 V5.0)

Certifications

• FCC Class A, CISPR22/EN55022 Class A, EN55024, CE Mark

Warranty

• Lifetime