Lantronix SBFTF1010-130 Stand-alone Fault-Tolerant Redundant Link Protector

Lantronix SBFTF1010-130 Stand-alone Fault-Tolerant Redundant Link Protector

SKU: SBFTF1010-130 Category:

The SBFTF1010-130 Redundant Link Protector is a 10/100 Ethernet fault-tolerant transceiver that significantly reduces network down time by adding a new level of redundancy to 10/100 Ethernet connections. The Redundant Transceiver has three ports: one for the critical (main) device, one for the default (primary) path to the critical device, and another (backup) for the backup path. It is a smart device that will not send any signal on a path that is inactive. If the primary path loses its link, then the transceiver will switch to the backup path in approximately 189 milliseconds.

When the primary path re-establishes its link, the Redundant Link Protector will automatically switch back to the primary path. Optional functionality, controlled via a dip switch, allows the unit to move from the fault-tolerant mode to a 3-port switch mode.

Lantronix SBFTF1010-130 Stand-alone Fault-Tolerant Redundant Link Protector

In stock


Stand-alone Fault-Tolerant Redundant Link Protector

  • Fault-tolerant redundant connections
  • Easy to install and use
  • Supports half and full-duplex transmission
  • Auto-MDI/MDIX
  • Auto-Negotiation
  • IEEE 802.3 compliant
  • 9 diagnostic LEDs
  • Optional 3-port switch mode


  • IEEE 802.3


  • Type: 8-position, RJ-45 receptacle:
  • 1: TX+5: NC (no connection)
  • 2: TX-6: RX-
  • 3: RX+7: NC (no connection)
  • 4: NC (no connection)
  • 8: NC (no connection)

Data Rate

  • 10/100 Mbps

Dip Switch

  • SW1 (TP): Auto-Negotiation enable/disable
  • SW2 (TP): 10Mbps or 100 Mbps
  • SW3 (Fiber): Half or Full-duplex
  • SW4: Redundancy/Switch

System LEDs

  • Power (PWR): Indicates the presence of POWER
  • Primary (PRI): Indicates a link is established on the Primary port
  • Backup (BKP): Indicates the link has moved over to the Backup port

Port LEDs

  • Lower Right:
  • Green indicates 100 Mbps;
  • Orange indicates 10 Mbps;
  • Flashing indicates Activity
  • Lower Left:
  • Green indicates full-duplex; Off half-duplex


  • Width: 3.25” [82.55 mm]
  • Depth: 4.8” [121.92 mm]
  • Height: 1″ [25 mm]

Power Consumption

  • 2.4 Watts

Power Input

  • 120 VAC @ 60 Hz. (Domestic)
  • 100 – 240 VAC @ 50 Hz. (International)

Power Output

  • 12 VDC, 0.5 Amp (Domestic)
  • 12 VDC, 1.25 Amp (International)


  • Operating: 0°C to 50°C
  • Storage: -15°C to 65°C
  • Humidity: 5% to 95% (non-condensing)
  • Altitude: 0 – 10,000 ft.


  • 2 lbs. [0.90 kg]


  • Safety: Wall Mount Power Supply: UL Listed & CSA certified; FCC Class A, EN55024, EN61000, CE Mark


  • Lifetime