Lantronix SGFEB Series Stand-alone Gigabit Ethernet Media and Rate Converter

SGFEB1040-330
SGFEB10xx-x3x-768×767-1
Lantronix S4120-1048 Stand-alone 10 Gigabit Ethernet Media Converter
Lantronix S4110-4848 Stand-alone Fiber to Fiber Media Converter

Lantronix SGFEB Series Stand-alone Gigabit Ethernet Media and Rate Converter

SKU: SGFEB1040 Category:

The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber.

Clear
Add to quote

Lantronix SGFEB Series Stand-alone Gigabit Ethernet Media and Rate Converter

In stock

Description

Stand-alone Gigabit Ethernet Media and Rate Converter
10/100/1000Base-T to 1000Base-SX/LX

  • Auto Negotiation
  • Auto-MDI/MDIX
  • Link Pass Through
  • Far End Fault (FEF)
  • Remote Fault Detect
  • Provides rate conversion while also increasing transmission distances
  • Supports multimode or single mode fiber
  • Versions available with fixed SC or LC optics, as well as modular SFP optics
  • Long haul transmission distances are supported with a variety of SFP modules
  • SFP ports support dual speeds: 100/1000/SGMII
  • Multiport versions provide 3 or 4 port switch functionality or provide redundant fiber links
  • Supports IEEE 802.3az Energy Efficient Ethernet

Standards

  • IEEE 802.3
  • IEEE 802.3ab
  • IEEE 802.3u
  • IEEE 802.3z
  • IEEE 802.3az

Data Rate

  • Copper: 10/100/1000 Mbps
  • Fiber: 1000 Mbps, 100 Mbps also supported via SFP port

Filtering Addresses

  • 8K MAC addresses

Max Frame Size

  • 10,260 byte Jumbo Frames

Dip Switch

  • Two Port Models
  • Switch 1: TP1 – Auto-Negotiation Enable / Disable
  • Switch 2: TP1 – Force 100Mbps or 10Mbps with switch 1 disabled
  • Switch 3: TP1 – Force Full or Half-Duplex with switch 1 disabled
  • Switch 4: Link Pass Through Enable / Disable
  • Switch 5 & 6: Controls the Fiber SFP port for 1000M, 100M, or SGMII Multiport Models with additional 4 position dip-switch
  • Switch 1 & 2: Controls the 2nd Fiber SFP port for 1000M, 100M, or SGMII
  • Switch 3 & 4: Fiber Redundancy Enable/Disable, Revertive Mode, and Fiber P2/P3 blocking

Status LEDs

  • PWR (Power): On = Power is provided to converter
  • LACT (Fiber Link/Activity): On = Link, Blink = Activity
  • RJ-45 Upper Left (TPLink/Activity/Duplex): Green = Link Full-Duplex, Blink = Activity, Amber = Link Half-Duplex, Blink = Activity
  • RJ-45 Upper Right (Speed): Green = 1000Mbps, Amber = 100Mbps, Off = 10Mbps

Dimensions

  • Width: 3.25” [82 mm]
  • Depth: 4.8” [122 mm]
  • Height: 1″ [25 mm]

Power Consumption

  • 2.2 Watts

Power Input

  • 7.5 to 24 VDC, Provided by wide input AC Wall Mount Adapter

Environment

  • Operating: 0°C to 50°C
  • Storage: -15°C to 65° C
  • Humidity: 5% to 95% (non-condensing)
  • Altitude: 0 – 10,000 ft.

Weight

  • 2 lbs. [0.90 kg]

MTBF

  • Greater than 250,000 MIL-HDBK-217F Hours.
    Greater than 687,500 Bellcore Hours
  • When bundled with a typical 50,000 hour power supply:
    Greater than 41,660 MIL-HDBK-217F Hours
    Greater than 114,580 Bellcore Hours

Certifications

  • EN55022 Class A, EN55024, FCC Class A, CE Mark
  • Safety: Wall Mounted Power Supply: UL Listed, UL60950 and CSA Certified

Warranty

  • Lifetime

Related products